Ampere Pro APK v4.04 (Mod)

Ampere Pro APK v4.04 (Mod)

Ampere APK Review

Did you ever felt that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.

Ampere Pro APK is a very useful tool to find out the voltage you’ll need to charge your battery. This means you can figure out if your old charger still works or if you should change it in order to recharge your device in a safer and more efficient way.

The information Ampere provides can vary depending on whether you’re connected to a power source, but generally, it can tell you the status of the battery, current battery percentage, technology used in its manufacture, temperature, model, device version, and IP address. If your device is charging, the application can also tell you the voltage coming from the power source to which you are connected.

After a pre-scan, you can see the amp-hours your device is receiving when it’s connected and how much it’s consuming without it. With this data, you can calculate the mA you need to charge your battery at a normal rate.

When the device is not connected, you’ll see the value as a negative number. To charge it, you need a difference of at least 200 mA. So, for example, if your device consumes 300 mA, you’ll need a charger that gives you at least 500mA if you want to use the device as it charges. The less energy you have, the less efficient the charging method.

Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.

PRO features:

– Widgets
– Notification
– Alerts on device
– Alerts on Android Wear

Enjoy using Ampere Pro!

Ampere Pro
Ampere Pro 2
Ampere Pro 3
Ampere Pro 4

Changelog

v3.55
* Preparations for Android 12
* Bug fixes and minor enhancements

Ampere FAQ: http://goo.gl/R8XgXX

For more info please read the change history: Settings => About Ampere => Change history

Note: When ampere would stuck in “measuring” state (after a firmware upgrade) please clear Amperes’s app cache.
1.) Open the “Android Settings app” => “Apps” => “Ampere”
2.) Clear all data under the “Storage” menu
3.) Restart Ampere

MOD info

Pro features unlocked;
Changed default app icon to dark style;
Changed to Dark Interface;
Disabled / Removed unwanted Permissions + Receivers and Services;
Analytics / Crashlytics disabled;
Disabled Start-up Info tutorial;
Send Anonymous crash disabled by default;
Optimized graphics / Zipalign;
AOSP Compatible.

Leave a Reply

Your email address will not be published. Required fields are marked *